Installation
Prerequisites
- The individual performing this installation has a small bit of Linux experience.
- Root access is available.
- Internet access is required for installing any missing but required software packages.
- NMIS must already be installed on the same server that opConfig is being installed on.
- opConfig requires a working MongoDB installation (but not necessarily on the same server)
- You will need a license for opConfig (evaluation licenses are available here).
Preparation
- If NMIS is not installed yet, please follow the instructions in the NMIS 8 Installation Guide (up to Version 8.5.4G10G).
If you do not have a MongoDB installation yet, please follow the instructions in the MongoDB Installation Guide.
opConfig does not require any specific MongoDB setup, but you will have to provide opEvents opConfig with the correct MongoDB server information, database name and user name/password (if you use authentication). opConfig works best with the default database name "nmis
", and with MongoDB authentication enabled.- Download opConfig from the Opmantek website.
Installation Steps
Transfer the opConfig tarball onto the server in question, either by direct download from the Opmantek website, or from your desktop with scp
or sftp
or a similar file transfer tool.
...
Become
root
and unpack the tarball:Code Block # become root if you aren't already sudo sh # if the tarball was saved you aren't already make sure you are in athe different location, adjustdirectory where the followingtarball commandwas saved cd /root #or /tmp for instance tar xzf opConfig-Linux-x86_64-2.0.0.tgz
Start the interactive installer and follow its instructions:
Code Block # become root if you aren't already sudo sh # move to the unpacked directory where the installer is cd opConfig-2.0.0/ # run the installer script ./installer ++++++++++++++++++++++++++++++++++++++++++++++++++++++ opConfig (2.0.0) Installation script ++++++++++++++++++++++++++++++++++++++++++++++++++++++ This installer will install opConfig into /usr/local/omk. To select a different installation location please rerun the installer with the -t option. ...
- The installer will interactively guide you through the steps of installing opConfig. Please make sure to read the on-screen prompts carefully.
- When the installer finishes, opConfig is installed into /usr/local/omk, and the default configuration files are in /usr/local/omk/conf, ready for your initial config adjustments.
- A detailed log of the installation process is saved as /usr/local/omk/install.log, and subsequent upgrades or installations of other Opmantek products will add to that logfile.
- For detailed information about the interactive installer please check the Opmantek Installer page.
...
Database Setup
- If your MongoDB is not locally installed, or if you set it up with custom credentials then you'll need to adjust the MongoDB-related settings:
openconf/opCommon.nmis
in an editor, go to the database section and change the server, username and password to reflect your MongoDB installation.
The result should look similar to the following (but there might be extra settings related to other products):
Code Block |
---|
'database' => { 'db_server' => 'localhost', 'db_port' => '27017', 'db_name' => 'nmis', 'db_username' => 'opUserRW', 'db_password' => 'op42flow42', }, |
- Access the opConfig GUI and enter your license.
The opConfig GUI is accessible athttp://<yourservername or ip address>/omk/opConfig/
, and until you have entered a valid license neither the opConfig GUI nor the CLI tools will operate. Setup Cron to perform the desired opConfig data collection periodically
opConfig's CLI toolopconfig-cli.pl
is responsible for performing such operations, and you should familiarize yourself with its capabilities: simply start it without any arguments, like this:Code Block # you should generally run opconfig-cli.pl as root sudo /usr/local/omk/bin/opconfig-cli.pl opconfig-cli.pl Version 1.2.4 ... usage: opconfig-cli.pl act={discover|test_connect} node=nodeX opconfig-cli.pl act=import_from_nmis [nodes=nodeA,nodeB... opconfig-cli.pl act=run_command_sets [nodes=nodeA,nodeB...] [tags=tagA,tagB...] ...
To perform periodic config collections, you should run
opconfig-cli.pl act=run_command_sets
from cron. You can set this up either usingcrontab -e
(as root), or by creating a cron 'snippet file' in/etc/cron.d/
- Check your cron documentation for details about system-wide cron files.
Here is an example cron snippet called /etc/cron.d/opConfig:Code Block # opConfig: hourly command set running 1 * * * * root /usr/local/omk/bin/opconfig-cli.pl quiet=1 act=run_command_sets tags=HOURLY # and the daily ones 7 7 * * * * root /usr/local/omk/bin/opconfig-cli.pl quiet=1 act=run_command_sets tags=DAILY # and a daily import from open-audit enterprise 21 4 * * * root /usr/local/omk/bin/opconfig-cli.pl quiet=1 act=import_audit # and a daily purge of old revisions 40 3 * * * root /usr/local/omk/bin/opconfig-cli.pl act=purge_revisions quiet=1
Configuration and Use
At this point opConfig should be ready for operation, but won't have any knowledge of which nodes to manage.
...