NMIS supports using SNMPv3 for securing the collection of sensitive network information. This is especially important from core switches and routers which if compromised could have a considerable business impact. This configuration note does not include details about the SNMPv3 protocol, and assumes that people are wanting to use the authPriv (Authentication and Privilege) mode which is the most secure.
NOTE: From NMIS 9.5.2, SHA256 and AES256 support is enabled by the installer (if selected)
| Table of Contents |
|---|
IMPORTANT NOTE ON 256 BIT ENCRYPTION PROTOCOL SUPPORT
...
The first step is to enable SNMPv3 on in the /etc/snmp/snmpd.conf file, then restart the daemon.
Required Linux SNMPD Configuration for SNMPv3 communication to
...
NMIS9
Add the following configuration to the top, edit the /etc/snmp/snmpd.conf file as the root user, e.g.
...
| Code Block |
|---|
/usr/local/nmis9/bin/admin/testtests.pl act=snmp node=NODENAME |
...
Updating NMIS9 to support SHA256 and AES256 including Cisco variants
The history of encryption in SNMPv3 is long From NMIS 9.5.2, SHA256 and AES256 support is enabled by the installer (if selected and passes Net::SNMP v6 requirements), so the instructions below are not required.
The history of encryption in SNMPv3 is long and winding and possibly interesting to some people, the reality is that the only consistency with SNMPv3 implementations is the inconsistency in the implementations by different vendors and projects. Frequently combinations of protocols are not supported (or do not work), so you need to find the matching combinations.
...
| NMIS9 name | Name | OID | Notes |
|---|---|---|---|
| des | usmDESPrivProtocol | 1.3.6.1.6.3.10.1.2.1 | RFC3411 |
| 3des | usm3DESPrivProtocol | 1.3.6.1.4.1.14832.1 | RFC3411 |
| aes (or aes128) | usmAESCfb128PrivProtocol | 1.3.6.1.4.1.14832.2 | Blumenthal implementation of SNMPv3 |
| aes192 | usmAESCfb192PrivProtocol | 1.3.6.1.4.1.14832.3 | Blumenthal implementation of SNMPv3 |
| aes256 | usmAESCfb256PrivProtocol | 1.3.6.1.4.1.14832.4 | Blumenthal implementation of SNMPv3 |
| aes192c | cusmAESCfb192PrivProtocol | 1.3.6.1.4.1.9.12.6.1.1 | Cisco implementation of SNMPv3 AES192 |
| aes256c | cusmAESCfb256PrivProtocol | 1.3.6.1.4.1.9.12.6.1.2 | Cisco implementation of SNMPv3 AES256 |
| aes192c2 | usmAES192Cisco2PrivProtocol | 1.3.6.1.4.1.9.12.6.1.101 | A mysterious version 2 of the Cisco implementation, possibly related to pysnmp |
| aes256c2 | usmAES256Cisco2PrivProtocol | 1.3.6.1.4.1.9.12.6.1.102 | A mysterious version 2 of the Cisco implementation, possibly related to pysnmp |
...
Copy the shipped USM.pm from the contrib folder and replace the Net::SNMP v6.0.1 version.
On RedHat 8 based systems (including our CentOS Virtual Machine)
NOTE: NMIS 9.5.2 will place the USM.pm file into the NMIS lib structure and does not change lib files outside of the nmis9 directory
On RedHat 8 based systems (including our CentOS Virtual Machine)
| Code Block |
|---|
sudo cp /usr/share/perl5/vendor_perl/Net/SNMP/Security/USM.pm /usr/share/perl5/vendor_perl/Net/SNMP/Security/USM.pm.original sudo cp /usr/local/nmis9/contrib/perl-net-snmp-256/USM.pm /usr/share/perl5/vendor_perl/Net/SNMP/Security/USM.pm |
On Debian/Ubuntu based systems
| Code Block |
|---|
sudo cp /usr/ # some similar systems may also have these files in ls -l /usr/local/share/perl5/Net/SNMP/Security/USM.pm # if they exist run the same operations to replace them sudo cp /usr/local/share/perl5/Net/SNMP/Security/USM.pm /usr/local/share/perl5/Net/SNMP/Security/USM.pm.original sudo cp /usr/local/nmis9/contrib/perl-net-snmp-256/USM.pm /usr/local/share/perl5/Net/SNMP/Security/USM.pm |
Find where USM.pm is installed
Older Linux versions will have the Perl module somewhere else, the fastest way to find it is to use find.
...
On Debian/Ubuntu based systems
| Code Block |
|---|
sudo findcp /usr -name /share/perl5/Net/SNMP/Security/USM.pm |
Restart the NMIS9 Daemon
| Code Block |
|---|
sudo systemctl restart nmis9d |
Update NMIS GUI to show new options
| Code Block |
|---|
/usr/share/perl5/Net/SNMP/Security/USM.pm.original sudo cp /usr/local/nmis9/contrib/perl-net-snmp-256/Table-NodesUSM.nmispm /usr/share/localperl5/nmis9/conf |
Testing SNMPv3 quickly
The contrib folder includes a lightweight SNMP testing tool, which differs from the nmis9/admin/tests.pl tool, in that it does not use net-snmp Linux package at all, it purely exercises the NMIS SNMP libraries.
| Code Block |
|---|
/usr/local/nmis9/contrib/perl-net-snmp-256/test-snmp.pl node=lab-fortigate
SNMP test results for lab-fortigate:
Open SNMP session to lab-fortigate
Auth Protocol: sha, Priv Protocol: aes
Testing SNMP session
Performing SNMP get of 1.3.6.1.2.1.1.1.0 and 1.3.6.1.2.1.1.2.0
sysDescr: lab-fortigate-int
sysObjectID: 1.3.6.1.4.1.12356.101.1.65
SNMP PASSED
|
To quickly change NMIS configuration to use a different combination, update the device and commit/apply changes.
...
Net/SNMP/Security/USM.pm |
Find where USM.pm is installed
Older Linux versions will have the Perl module somewhere else, the fastest way to find it is to use find.
| Code Block |
|---|
sudo find /usr -name USM.pm |
Restart the NMIS9 Daemon
| Code Block |
|---|
sudo systemctl restart nmis9d |
Update NMIS GUI to show new options
| Code Block |
|---|
# Make a copy of original incase you have customization and forget to add it
# If command says it doesnt exisit you can skip to next command
sudo cp /usr/local/nmis9/conf/Table-Nodes.nmis /usr/local/nmis9/conf/Table-Nodes.nmis.bak
# Adding in new SNMPv3 Options
sudo cp /usr/local/nmis9/contrib/perl-net-snmp-256/Table-Nodes.nmis /usr/local/nmis9/conf |
Testing SNMPv3 quickly
The contrib folder includes a lightweight SNMP testing tool, which differs from the nmis9/admin/tests.pl tool, in that it does not use net-snmp Linux package at all, it purely exercises the NMIS SNMP libraries.
| Code Block |
|---|
/usr/local/nmis9/admin/node_admin/contrib/perl-net-snmp-256/test-snmp.pl act=set node=lab-fortigate entry.configuration.authprotocol=sha256 entry.configuration.privprotocol=aes256c |
Repeat your SNMP test
| Code Block |
|---|
SNMP test results for lab-fortigate:
Open SNMP session to lab-fortigate
Auth Protocol: sha256sha, Priv Protocol: aes256caes
Testing SNMP session
Performing SNMP get of 1.3.6.1.2.1.1.1.0 and 1.3.6.1.2.1.1.2.0
sysDescr: lab-fortigate-int
sysObjectID: 1.3.6.1.4.1.12356.101.1.65
SNMP PASSED |
More on Vendor Support for SHA and AES 256
In testing the NMIS development team found that the implementation of SNMP options was not consistent.
For example on a Fortigate device, the administration GUI allowed setting SHA256 and AES256 but these would not work together. When SHA256 and AES256 Cisco were used, the system was very happy.
Many Cisco devices will support SHA256 but only AES128 (which given the entropy is reasonable "AES-128 would take about 2.61*10^12 years to crack" https://www.ubiqsecurity.com/128bit-or-256bit-encryption-which-to-use/).
At the time of writing (March 2023) net-snmp on Linux does not include support for AES256 by default (including SNAP repositories). net-snmp does support AES256, you just need to compile if yourself.
SNMPv3 Error Messages and How to Decode Them
No response from remote host during synchronization
The test-snmp.pl tool would show this:
| Code Block |
|---|
ERROR: Could not open SNMP session to node lab-fortigate: No response from remote host "lab-fortigate-int.opmantek.net" during synchronization |
This means you have the wrong authentication protocol or password, you will need to change them and try again
No response from remote host
The test-snmp.pl tool would show this:
| Code Block |
|---|
ERROR: Could not retrieve SNMP vars from node lab-fortigate: No response from remote host "lab-fortigate-int.opmantek.net" |
This means you have the wrong privilege protocol or password, you will need to change them and try again
The authProtocol is unknown during discovery
The test-snmp.pl tool would show this:
| Code Block |
|---|
ERROR: Could not open SNMP session to node lab-fortigate: The authProtocol "1.3.6.1.6.3.10.1.1.5" is unknown during discovery |
This means the remote SNMP agent in the end device (node) does not know what this authentication protocol is.
Confirmed working combinations
The below is a list of confirmed working SNMPv3 combinations across a variety of different vendor and operating systems.
This is by no means a comprehensive list of the products we support.
...
|
To quickly change NMIS configuration to use a different combination, update the device and commit/apply changes.
Update NMIS node details:
| Code Block |
|---|
/usr/local/nmis9/admin/node_admin.pl act=set node=lab-fortigate entry.configuration.authprotocol=sha256 entry.configuration.privprotocol=aes256c |
Repeat your SNMP test
| Code Block |
|---|
SNMP test results for lab-fortigate:
Open SNMP session to lab-fortigate
Auth Protocol: sha256, Priv Protocol: aes256c
Testing SNMP session
Performing SNMP get of 1.3.6.1.2.1.1.1.0 and 1.3.6.1.2.1.1.2.0
sysDescr: lab-fortigate-int
sysObjectID: 1.3.6.1.4.1.12356.101.1.65
SNMP PASSED |
More on Vendor Support for SHA and AES 256
In testing the NMIS development team found that the implementation of SNMP options was not consistent.
For example on a Fortigate device, the administration GUI allowed setting SHA256 and AES256 but these would not work together. When SHA256 and AES256 Cisco were used, the system was very happy.
Many Cisco devices will support SHA256 but only AES128 (which given the entropy is reasonable "AES-128 would take about 2.61*10^12 years to crack" https://www.ubiqsecurity.com/128bit-or-256bit-encryption-which-to-use/).
At the time of writing (March 2023) net-snmp on Linux does not include support for AES256 by default (including SNAP repositories). net-snmp does support AES256, you just need to compile if yourself.
SNMPv3 Error Messages and How to Decode Them
No response from remote host during synchronization
The test-snmp.pl tool would show this:
| Code Block |
|---|
ERROR: Could not open SNMP session to node lab-fortigate: No response from remote host "lab-fortigate-int.opmantek.net" during synchronization |
This means you have the wrong authentication protocol or password, you will need to change them and try again
No response from remote host
The test-snmp.pl tool would show this:
| Code Block |
|---|
ERROR: Could not retrieve SNMP vars from node lab-fortigate: No response from remote host "lab-fortigate-int.opmantek.net" |
This means you have the wrong privilege protocol or password, you will need to change them and try again
The authProtocol is unknown during discovery
The test-snmp.pl tool would show this:
| Code Block |
|---|
ERROR: Could not open SNMP session to node lab-fortigate: The authProtocol "1.3.6.1.6.3.10.1.1.5" is unknown during discovery |
This means the remote SNMP agent in the end device (node) does not know what this authentication protocol is.
Confirmed working combinations
The below is a list of confirmed working SNMPv3 combinations across a variety of different vendor and operating systems.
This is by no means a comprehensive list of the products we support.
| Vendor / Operating System | SHA | AES | NMIS Considerations |
|---|---|---|---|
| Cisco IOS | SHA1 | AES256 | aes256c needs to be configured as the entry.configuration.privprotocol value |
| SHA1 | AES192 | aes192c needs to be configured as the entry.configuration.privprotocol value | |
| SHA1 | AES128 | ||
| Cisco NX-OS | SHA1 | AES128 | |
| SHA256 | AES128 | ||
| Fortinet | SHA1 | AES | |
| SHA224 | AES256 Cisco | sha224 needs to be configured as the entry.configuration.authprotocol value AND aes256c needs to be configured as the entry.configuration.privprotocol value | |
| SHA256 | AES256 Cisco | sha256 needs to be configured as the entry.configuration.authprotocol value AND aes256c needs to be configured as the entry.configuration.privprotocol value | |
| SHA384 | AES256 Cisco | sha384 needs to be configured as the entry.configuration.authprotocol value AND aes256c needs to be configured as the entry.configuration.privprotocol value | |
| SHA512 | AES256 Cisco | sha512 needs to be configured as the entry.configuration.authprotocol value AND aes256c needs to be configured as the entry.configuration.privprotocol value | |
| Palo Alto | SHA1 | AES128 | |
| SHA224 | AES128 | ||
| SHA256 | AES128 | ||
| SHA384 | AES128 | ||
| SHA224 | AES192 | aes192c needs to be configured as the entry.configuration.privprotocol value | |
| SHA256 | AES192 | aes192c needs to be configured as the entry.configuration.privprotocol value | |
| SHA256 | AES256 | aes256c needs to be configured as the entry.configuration.privprotocol value | |
| SHA384 | AES192 | aes192c needs to be configured as the entry.configuration.privprotocol value | |
| SHA384 | AES256 | aes256c needs to be configured as the entry.configuration.privprotocol value | |
| NET-SNMP (Tested on v5.8 with Ubuntu 20.04) | SHA512 | AES128 | sha512 needs to be configured as the entry.configuration.authprotocol value |
| HUAWEI | SHA256 | AES256 | aes256c needs to be configured as the entry.configuration.privprotocol value |
You may notice that when configuring SNMPv3 on a (for example) Cisco IOS device that there is not an explicit AES192C/AES256C in the command, rather it is needed to be defined as AES 192 and/or AES 256.
When configuring the device for NMIS, you will need to explicitly tell it to use AES192C/AES256C using node_admin.pl (example covered previously).
Related Topics
...