Page Comparison

...

Prerequisites

The individual performing this installation has some Linux experience.

...

An existing (working) Open-AudIT installation.

NOTE - This guide is for upgrading an existing Linux installation to Open-AudIT 1.0.42. If you wish to install onto a clean server, use the pre-requisites prerequisites and installation guides.

NOTE - Open-AudIT 1.2 has some additional prerequisites. Please ensure you install screen, ssh-pass and samba-client via your package manager. Please also install winexe via the Suse Build Service. Details are on the prerequisites pages for RedHat/CentOS and Debian/Ubuntu.

Backup Your Existing Install

...

Copy the Open-AudIT tarball to the server (OAE-Linux-x86_64-1.0.42.tar.gz).

You may need to use SCP or FTP to get the file onto the server.

...

Code Block

language	bash

chown -R root:root omk

chmod -R 775 omk

chmod -R 770 /usr/local/open-audit

chmod -R 777 /usr/local/open-audit/code_igniter/application/views/lang
 
chmod -R 777 /usr/local/open-audit/code_igniter/application/uploads

chmod 770 /usr/local/open-audit/other/audit_linux.sh

chmod 770 /usr/local/open-audit/other/audit_subnet.sh

chmod 660 /usr/local/open-audit/other/open-audit.log
 
chmod 770 /usr/local/open-audit/other/discover_subnet.sh

Change permissions for Debian / Ubuntu

...

Code Block

language	bash

cd omk

Install the omkd Daemon (if not installed)

Copy the daemon startup script.

Code Block

language	bash

cp /usr/local/omk/install/omkd.init.d /etc/init.d/omkd

Edit the start up script

Adjust the startup script for your flavor of Linux distribution

Section

Column

width	40%

for Debian / Ubuntu

You need to comment out the lines (nano /etc/init.d/omkd)

Code Block

language	bash

. /etc/init.d/functions             # RedHat/CentOS only
 
lockfile=/var/lock/subsys/$prog     # RedHat/CentOS only

killproc $prog              killproc  $prog           # Redhat/CentOS only

and uncomment (remove the # from the front of the line) the lines below them

Code Block

language	bash

# . /lib/lsb/init-functions          # Debian/Ubuntu only
 
# lockfile=/var/lock/$prog           # Debian/Ubuntu only
 
# pkill $prog         #pkill  $prog                   ## Debian/Ubuntu only

Column

width	40%

for RedHat / CentOS - nothing required.

Add the daemon to the startup sequence

Section

Column

width	40%

For Debian / Ubuntu

Code Block

language	bash

update-rc.d omkd start 20 2 3 4 5 . stop 20 0 1 6 .

Column

width	40%

For RedHat / CentOS

Code Block

language	bash

chkconfig --add omkd

Copy the config files.

Code Block

language	bash

cp install/users.dat conf/

cp install/oae_reports.json conf/

cp install/opCommon.nmis conf/

Edit the config files.

Code Block

language	bash

nano conf/opCommon.nmis

Edit the "openauditenterprise" section and insert the actual OAE_SERVER variable - By default this should be "http://127.0.0.1/open-audit/". You should not need to change this. If you do, insert the ip address of the server (not 127.0.0.1 or localhost are also fine) in to the oae_server variable (along with http:// and don't forget the trailing /). If you have Open-AudIT installed into a subdirectory sub-directory in your web root, be sure to add that to the end of the oae_server variable above. On the Opmantek virtual appliance (for example) it would be http://<SERVER_IP>/open-audit/

OAE_LINK variable - By default this should be "/open-audit/". You should not need to change this. If you have Open-AudIT installed into a sub-directory in your web root, be sure to add that to the end of the oae_link variable above. On the Opmantek virtual appliance (for example) it would be "/open-audit/" NOTE - If your Open-AudIT Enterprise and Open-AudIT installations are on the same machine, the oae_link variable should be set to only the directory of Open-AudIT. IE - if you have an Open-AudIT install in the root of your web directory, you can set the variable to "/". On the Opmantek virtual appliance it would be set to "/open-audit/".

If you have other Opmantek software installed (NMIS, opMaps, etc) you can also edit the module_configs -> module_host variable in opCommon.nmis. Replace http://localhost with the address of the server.

...

Code Block

language	bash

useradd nmis

...

Anchor
proxy
proxy
Integrate the omkd daemon

...

Edit the file /usr/local/omk/install/04omk-proxy.conf and insert the ip address of the server into the relevant "location" sections (replacing <SERVER>). Make sure you don't use 127.0.0.1.

Code Block

language	bash

nano /usr/local/omk/install/04omk-proxy.conf

...

with Apache

To make the Opmantek applications accessible via the web the omkd needs to be integrated with your Apache webserver, so that the Apache serving as a front-end knows how to reach the omkd-provided applications.

You need to copy the apache proxy config file to the correct location and restart apache.

Please note that it is essential that you perform the following step and replace any existing proxy config files from older Open-AudIT Enterprise installations! Release 1.2.1 corrects a security issue with the proxy configuration which could have been abused for denial-of-service attacks if Open-AudIT Enterprise was installed with unrestricted inbound access from the Internet.

For Debian / Ubuntu:

Code Block

language	bash

cp /usr/local/omk/install/04omk-proxy.conf /etc/apache2/conf.d/

...

Code Block

language	bash

service omkd start

Edit the Open-AudIT scripts (if using a web root subdirectory)

If you have your web root in a subdirectory (as per the Opmantek virtual appliance), you will need to edit the "url" variable in the various script files. These files can be found in /usr/local/open-audit/other/ The files you will need to edit all begin with audit_ They include audit_linux.sh, audit_subnet.sh, audit_windows.vbs, etc, etc. The URL variable can usually be found at the top of the file.

...

Delete the old web files

The new web files

...

If your Open-AudIT install is into a subdirectory of your webroot, be sure to add that to the end of the destination of the cp command belowshould live in the subdirectory /open-audit/. We should remove the existing web files.

For Debian / Ubuntu (prior to 14.04)

Code Block

language	bash

cprm -Rfrf /usrvar/localwww/open-audit/www/*
 
rm -rf /var/www/device_images

rm -rf /var/www/theme-tango

rm /var/www/index.php

rm /var/www/favicon.png

For RedHat / CentOS / Ubuntu 14.04

Code Block

language	bash

cprm -Rfrf /usrvar/www/localhtml/open-audit/www/*
 
rm -rf /var/www/html/device_images

rm -rf /var/www/html/theme-tango

rm /var/www/html/index.php

rm /var/www/html/

...

favicon.png

Copy new web files

If your Open-AudIT install is into a subdirectory of your webroot, be sure to add that to the end of the destination of the cp command below.

For Debian / Ubuntu (prior to 14.04)

Code Block

language	bash

cp -Rf /usr/local/open-audit/www/* /var/www/html/open-audit/

Fix the file permissions

For Debian For RedHat / CentOS / Ubuntu 14.04

Code Block

language	bash

chmodcp -R 775Rf /usr/local/open-audit/www/* /var/www/html/

Fix the file permissions

For RedHat / CentOSDebian / Ubuntu (prior to 14.04)

Code Block

language	bash

chmod -R 775 /var/www/html

For the Opmantek virtual applianceRedHat / CentOS / Ubuntu 14.04

Code Block

language	bash

chmod -R 775 /var/www/html/open-audit

Restore old files (if required)

Copy any attachment files from your old to the new install.

...

If you have any Groups or Report files saved in /usr/local/open-audit_backup/code_igniter/application/controllers/(groups or reports)/ that have been custom written, you may wish to copy them to the new install. If they are already activated in the database, there should be no need.

Log in to Open-AudIT at http://SERVER/open-audit/index.php/main/list_groups and go to Help -> About to verify that the installation status is ok; if a database upgrade is required, that page will display all relevant instructions for performing the database upgrade.

...

Code Block

language	bash

service apacheapache2 reload

for RedHat / CentOS

...

In the Open-AudIT web interface, go to Menu -> Admin -> Config and set the URLs for opMaps, Dashboard and NMIS. These will likely be:

For opMaps - http://IPADDRESS/omk/oae/map

For Dashboard - http://IPADDRESS/omk/oae

For NMIS - http://IPADDRESS/cgi-nmis8/nmiscgi.pl

Check your Groups and Reports are functional. If you have some standard Groups and Reports activated, you may wish to deactivate them (Menu -> Admin -> Groups -> List Groups -> delete icon) and activate new ones (Menu -> Admin -> Groups -> Activate Group). Most Group and Report definitions have been updated. Do not deactivate Network Groups. These are created dynamically and if you deactivate them, you will either have to wait until a new computer is audited on the subnet in question (and hence the Group is recreated) or manually input a Group definition.

Ensure you copy the new audit scripts to any hosts that use them - these are usually updated.

Enjoy Open-AudIT v1.0.4 AudIT

Versions Compared

Old Version 18

New Version Current

Key

Install the omkd Daemon (if not installed)

Copy the daemon startup script.

Edit the start up script

Adjust the startup script for your flavor of Linux distribution

Add the daemon to the startup sequence

Copy the config files.

Edit the config files.

Anchor
proxy
proxy
Integrate the omkd daemon

with Apache

Edit the Open-AudIT scripts (if using a web root subdirectory)

Delete the old web files

Copy new web files

Page Comparison

Versions Compared

Old Version 18

New Version Current

Key

Install the omkd Daemon (if not installed)

Copy the daemon startup script.

Edit the start up script

Adjust the startup script for your flavor of Linux distribution

Add the daemon to the startup sequence

Copy the config files.

Edit the config files.

AnchorproxyproxyIntegrate the omkd daemon

with Apache

Edit the Open-AudIT scripts (if using a web root subdirectory)

Delete the old web files

Copy new web files

Anchor
proxy
proxy
Integrate the omkd daemon