Page Comparison

...

Step 1. Create your Command Set

Before creating the quick action you will need to have your Command Set file created. opConfig lets you organize whatever commands you'd like it to run into an arbitrary number of groups which we call command sets. Let's create a basic command set using df to check the disc space on a Linux device for the purposes of this How-To however, these command sets can be as simple or as complicated as needed to complete the required desired tasks.Step 1. Create your Command Set:

Command sets are stored in the single file conf/command_sets.nmis in opConfig before 2.2.4, and since 2.2.4 opConfig supports this and individual command set files in conf/command_sets.d/. It is recommended that you use individual files (as that makes things easier to maintain and more robust, e.g. should one file have syntactical problems). For backwards compatibility the old single file is consulted first, then any individual ones. opConfig loads a command set when it's seen for the first time, and any subsequent occurrences of a clashing config set (i.e. same name) will be ignored but logged.

...

The examples above specify that the node in question must have an os_info property set, with sub-properties  properties os and version in the first example and just os in the second.

Plain string values indicate string comparison, but regular expressions can be given too. A node is only considered for this particular command set if all filtering expressions match. You can filter on any node property, not just properties from os_info (but the default command sets only use os_info).

...

From opConfig 3.1.1 onwards a command set without filter is interpreted as to apply to all nodes without any restriction.

More information on Command Sets can be found HERE

Step 2: Create your Quick Action

Quick Actions

Quick actions are templates for new Virtual Operator jobs, we have shipped four sample jobs but you can create your own. Clicking the quick action button will take you too a new virtual operator screen and fill out the specified fields. The default four jobs are defined in the file: /usr/local/omk/lib/json/opConfig/table_schemas/opConfig_action-elements.json

...

You can create your own Quick Actions by copying the /usr/local/omk/lib/json/opConfig/table_schemas/opConfig_action-elements.json file to /usr/local/omk/conf/table_schemas/ (you may need to create the table_schemas folder if it does not exist) and then editing it. Available field options are described in the table below.

...

cp /usr/local/omk/lib/json/opConfig/table_schemas/opConfig_action-elements.json /usr/local/omk/conf/table_schemas/
cd /usr/local/omk/conf/table_schemas
vi opConfig_action-elements.json

Once inside the opConfig_action-elements.json file, create a new section for the command set we created. Below is an example of the entry I added to the file:

{
"name":

...

 "Linux Disc Space Test",
"description":

...

 "Check Disc Space for Linux Devices",
"nodes": ["odem"],
"command_sets": ["

...

DF_

...

Test"],

...

"buttonLabel":

...

 "Check Disc Space",

...

"buttonClass": "btn-primary"

...

}

...

Step 3: Confirm your Quick Action is working

After adding your Quick Action entry to the opConfig_action-elements.json file, navigate to opConfig and select 'Virtual Operator'. As shown in the screenshot below the newly created Quick Action 'Linux Disc Space Test' is now displaying. Click on the button to start the Quick Action.

Image Added

After clicking the Quick Action button the page below will auto fill the nodes provided in the opConfig_action-elements.json file as well as the Command Sets we created in the df_test.nmis file. Schedule a time for the Quick Action to run, give it a name and a description then click 'Schedule'.

Image Added

Once the job has been completed you can view the results and details of the Quick Command. To view the command output click on the command in the Commands table as indicated by the arrow in the screenshot below.

Image Added

The page below displays the command output as well as the Command Summary and the Most Recent Revisions. That's it, that's all there is to it! Your Quick Action is working!

Image Added

...