...
First you will want to make sure your servers NET-SNMP install is setup appropriately. Refer to these install instructions:
SNMPD, Net-SNMP and collecting stats of the NMIS server itself
Next you will need to copy the options file to the right location and restart the daemon.
...
Code Block |
---|
CISCO-CONFIG-MAN-MIB::ccmHistoryEventConfigDestination.34 |
NMIS9 Setup
...
NMIS 9 has included some Cisco and Generic MIBS and added the ability to view the SNMP traps in the NMIS logging tool.
First you will want to make sure your servers NET-SNMP install is setup appropriately. Refer to these install instructions:
SNMPD, Net-SNMP and collecting stats of the NMIS server itself
CentOS/RHEL 7.x
Next you will need to copy the options file to the right location and restart the daemon.
Code Block |
---|
sudo cp /usr/local/nmis9/conf-default/snmpd/snmptrapd.options /etc/sysconfig/snmptrapd sudo cp /usr/local/nmis9/conf-default/snmpd/snmptrapd.conf /etc/snmp/snmptrapd.conf sudo service snmptrapd restart |
Verify Operation
You can test the MIB resolution with this command
...
Code Block |
---|
CISCO-CONFIG-MAN-MIB::ccmHistoryEventConfigDestination.34 |
Send a Test Trap
To verify operation you can send a test trap either locally or from another Linux server, this example sends an Opmantek event trap.
Code Block |
---|
sudo snmptrap -v 2c -c public 127.0.0.1 80000 1.3.6.1.4.1.4818 1.3.6.1.4.1.4818.1 s Event |
The trap will appear in either /usr/local/nmis8/logs/trap.log orĀ /usr/local/nmis9/logs/trap.log
Add New SNMP MIBS for Trap Processing
...