The UPS Configured Models Report displays UPS models configured under 'report_ups_configured_models' in opCommon.nmis configuration file.
Setup:
Firstly edit /path/to/omk/conf/opCommon.nmis setting report_ups_configured_models which has the following default setting.
This configuration setting - only configured need only be set once as needed to configure the UPS models will be displayed:to be returned in the report.
| Code Block |
|---|
'report_ups_configured_models' => {
'POWERALERT-APC' => {
'exclude_nodegraphs_in_this_report_type' => 'health,upspwr,upsbattemp'
},
'POWERALERT-ups' => {
'exclude_nodegraphs_in_this_report_type' => 'health,upspwr,upsbattemp'
}
}, |
...
The report will include graphtype health if health is removed from exclude_nodegraphs_in_this_report_type.
exclude_nodegraphs_in_this_report_type => undef will cause all available graphtypes to be displayed.
The above configuration setting need only be set once as needed to configure the UPS models to be returned in the report.
Then choose UPS Configured Models ReportunderCreate New Report >> General >> Type:
...