The table below describes which combinations of Opmantek products are tested and work well with what versions of NMIS and MongoDB.
Please note that MongoDB 3.6 is not supported by Opmantek applications at this time.

NMIS

NMIS Documentation.

NMIS 8 Release Notes

NMIS 9 Release Notes

NMIS 8 compatibility list:

NMIS Version

MongoDB Version
(bold: recommended)

Operating

Systems

Notes

8.6.8

N/A

Debian 7, 8
Ubuntu 16
CentOS 7*
RHEL 7*

If install of NMIS 8 fails due to failure to install package WWW::Mechanize, pre-install WWW::Mechanize before installing NMIS:

sudo yum install -y perl-CPAN;
sudo yum install -y perl-App-cpanminus;
sudo cpanm WWW::Mechanize --sudo --notest;

*NB CentOS 6 and RHEL 6 are supported for existing customers who purchased support prior to 2020.

NMIS 9 compatibility list:

NMIS Version

MongoDB Version
(bold: recommended)

Operating

Systems

Notes

> 9.0.0

3.4, 3.6

Debian 9, 10*
Ubuntu 18, 20
CentOS 7**
RHEL 7
RHEL 8

RHEL 8 is supported from NMIS version 9.2.1

On Debian 8, a compatible version of MongoDB Perl Driver (version 1.2.3 or newer) cannot be installed, even when CPANM is used.
On Ubuntu 16.04, pre-installing cpanminus, MongoDB Perl Driver and Mojo::File allows for a clean install of NMIS9:

apt-get install build-essential cpanminus;
cpanm --sudo MongoDB;
cpanm --sudo Mojo::File;

If install of NMIS 9 fails due to failure to install package WWW::Mechanize, pre-install WWW::Mechanize before installing NMIS:

sudo yum install -y perl-CPAN;
sudo yum install -y perl-App-cpanminus;
sudo cpanm WWW::Mechanize --sudo --notest;

Release 9.0.4 of NMIS introduces the smarter non-interactive installation mode.

*Should Debian 10 install fail with this error,
'The following signatures couldn't be verified because the public key is not available: NO_PUBKEY',
please run the following commands to install the needed GPG Keys and reinstall:

sudo -i
type wget >/dev/null 2>&1 && GIMMEKEY="wget --tries=5 -q -T 20 -O - https://ftp-master.debian.org/keys/archive-key-8.asc" || GIMMEKEY="curl --retry 4 -L -s -m 20 https://ftp-master.debian.org/keys/archive-key-8.asc";
$GIMMEKEY | apt-key add -||$GIMMEKEY | apt-key add -||$GIMMEKEY | apt-key add -;

**CentOS 8 support has been withdrawn due to CentOS 8 being end of maintenance in 31 Dec 2021, your CentOS target should be CentOS 7 https://wiki.centos.org/About/Product

Opmantek Installer

Some notes that are common for all Opmantek Applications:

The Opmantek installer can be preseeded before the installer is invoked.
On CentOS and RHEL, always check the status of firewalld and selinux when unable to connect via http|https. During the installation, the installer prompts for disable selinux.

Open-AudIT

Open-AudIT Documentation.

Open-AudIT Release Notes

Product

Product Version

Database

Operating

Systems

Notes

Open-AudIT

3.3.1 +

MariaDB

Windows Server 2016 and up (not compatible with Windows 10)
CentOS 7**
RHEL 7
RHEL 8
Debian 9 and up*
Ubuntu 18.04 and up

64bit systems only. More information.

*Should Debian 10 install fail with this error,
'The following signatures couldn't be verified because the public key is not available: NO_PUBKEY',
please run the following commands to install the needed GPG Keys and reinstall:

sudo -i
type wget >/dev/null 2>&1 && GIMMEKEY="wget --tries=5 -q -T 20 -O - https://ftp-master.debian.org/keys/archive-key-8.asc" || GIMMEKEY="curl --retry 4 -L -s -m 20 https://ftp-master.debian.org/keys/archive-key-8.asc";
$GIMMEKEY | apt-key add -||$GIMMEKEY | apt-key add -||$GIMMEKEY | apt-key add -;

**CentOS 8 is not supported due to CentOS 8 being end of maintenance in 31 Dec 2021, your CentOS target should be CentOS 7 https://wiki.centos.org/About/Product

opConfig

opConfig Documentation.

opConfig Release Notes

opConfig 2.X 3.X compatibility list:

Product	Product Version	NMIS Version	MongoDB Version (bold: recommended)	Notes
opConfig	2.2.0	>= 8.5.0, <= 8.5.8G	2.4	opConfig 2.2.0 won't be able to report config changes to NMIS if you run it with NMIS 8.5.10G
opConfig	2.2.2, 2.2.4	>= 8.5.10G	2.4, 2.6 or 3.0 - 3.4
opConfig	3.0.0	>= 8.5.10G	2.4, 2.6 or 3.0 - 3.4	To provide compatilibity with MongoDB 2.4 you have to set the configuration option db_use_v26_features to "false" or 0 (in conf/opCommon.nmis)
opConfig	3.0.3, 3.0.4	>= 8.5.10G	2.6, 3.0 - 3.4

opConfig 4.X compatibility list:

Product

Product Version

NMIS Version

MongoDB Version
(bold: recommended)

Notes

opConfig

4.0.0

> 9.0.0

3.4

NMIS needs to be installed but doesn't need to be running.

Please check the opConfig 4 release notes for a specific NMIS minor version requirement.

opConfig

4.1.1-4.3.0

>9.1.0

3.4

opConfig

>4.3.0

>9.2.4

3.6

! For a list of compatible Operating Systems please check the NMIS version compatibility list.

opHA

opHA Documentation.

opHA Release Notes

opHA 2.X Compatibility list:

Product

Product Version

NMIS Version

MongoDB Version
(bold: recommended)

Notes

opHA

2.1.2

>= 8.5.0, <= 8.5.8G

N/A

opHA 2.1.2 won't be able to transfer NMIS event statuses

if you run it with NMIS 8.5.10G

opHA

2.1.4

>= 8.5.10G

N/A

opHA 3.X Compatibility list:

Product	Product Version	NMIS Version	MongoDB Version (bold: recommended)	Notes
opHA	>= 3.0.0	>= 9.0.0	3.4	Please check the opHA 3 release notes for a specific NMIS minor version requirement.
opHA	>3.1.2	>9.1.0	3.4
opHA	>3.4.0	>9.2.4	3.4, 3.6

! For a list of compatible Operating Systems please check the NMIS version compatibility list.

opEvents

opEvents Documentation.

opEvents Release Notes

opEvents 1.X & 2.X Compatibility list:

Product	Product Version	NMIS Version	MongoDB Version (bold: recommended)	Notes
opEvents	1.2.4	>= 8.5.0	2.4
opEvents	1.2.6, 2.0.0	>= 8.5.10G	2.4, 2.6, 3.0 - 3.4
opEvents	2.0.2	>= 8.5.10G	2.6, 3.0 - 3.4	With MongoDB older than 2.6 the events table on the dashboard page will be empty.
opEvents	2.0.3 - 2.0.6	>= 8.5.10G	2.4, 2.6, 3.0 - 3.4	To provide compatilibity with MongoDB 2.4 you have to set the configuration option `db_use_v26_features` to "false" or 0 (in `conf/opCommon.nmis`)
opEvents	2.2.0 - 2.4.0	>= 8.5.10G	2.6, 3.0 - 3.4

opEvents 3.X Compatibility list:

Product

Product Version

NMIS Version

MongoDB Version
(bold: recommended)

Notes

opEvents

>= 3.0.0

> 9.0.0

3.4

NMIS needs to be installed but doesn't need to be running.

Please check the opConfig 4 release notes for a specific NMIS minor version requirement.

opEvents

>3.1.0

>9.1.0

3.4

opEvents

>4.1.0

>9.2.4

3.4, 3.6

! For a list of compatible Operating Systems please check the NMIS version compatibility list.

opCharts

opCharts Documentation.

opCharts Release Notes

opCharts 2.X & 3.X Compatibility list:

Product	Product Version	NMIS Version	MongoDB Version (bold: recommended)	Notes
opCharts	2.4.12	>= 8.5.6G	N/A
opCharts	2.6.2	>= 8.5.6G	N/A	opCharts works best with NMIS 8.5.10G
opCharts	3.0.0 - 3.0.7	>= 8.5.6G	2.6, 3.0 - 3.4	opCharts works best with NMIS 8.5.10G or newer
opCharts	3.0.8	>= 8.5.10G	2.6, 3.0 - 3.4
opCharts	3.0.10	>= 8.5.10G	2.6, 3.0 - 3.4
opCharts	3.2.0	>= 8.5.10G	3.0 - 3.4	At and above opCharts 3.2 Mongo 3 is required
opCharts	3.2.4 - 3.2.5	>= 8.6.2	3.0 - 3.4

opCharts 4.X Compatibility list:

Product	Product Version	NMIS Version	MongoDB Version (bold: recommended)	Notes
opCharts	>= 4.0.0	>= 9.0.0	3.4	Please check the opCharts 4 release notes for a specific NMIS minor version requirement.
opCharts	>4.1.3	>9.1.0	3.4
opCharts	>4.3.0	>=9.2.4	3.4, 3.6

! For a list of compatible Operating Systems please check the NMIS version compatibility list.

opReports

opReports Documentation.

opReports Release Notes

opReports 3.X Compatibility list:

Product	Product Version	NMIS Version	MongoDB Version (bold: recommended)	Notes
opReports	3.0.2 - 3.0.8	>= 8.5.0	N/A
opReports	3.0.10 - 3.0.14	>=8.6.0	N/A	Display names are not supported if you use older versions of NMIS
opReports	3.1.0	>=8.6.2	N/A

opReports 4.X Compatibility list:

Product	Product Version	NMIS Version	MongoDB Version (bold: recommended)	Notes
opReports	> 4.0.0	>= 9.0.11	N/A	Please check the opReports release notes for a specific NMIS minor version requirement.
opReports	>4.1.1	>9.1.0	N/A
opReports	>4.3.0	>9.2.4	N/A

! For a list of compatible Operating Systems please check the NMIS version compatibility list.

opAddress

opAddress Documentation.

opAddress Release Notes

opAddress 1.X Compatibility list:

Product	Product Version	NMIS Version	MongoDB Version (bold: recommended)	Notes
opAddress	1.0.4	> 8.5.0	2.4
opAddress	1.0.5	>= 8.5.10G	2.4, 2.6, 3.0 - 3.4

opAddress 2.X Compatibility list:

Product	Product Version	NMIS Version	MongoDB Version (bold: recommended)	Notes
opAddress	2.0.0	>= 9.2.1	3.0 - 3.4
opAddress	>2.1.0	>= 9.2.4	3.4, 3.6

! For a list of compatible Operating Systems please check the NMIS version compatibility list.

opFlow and opFlowSP

opFlow Documentation

Product	Product Version	NMIS Version	MongoDB Version (bold: recommended)	Notes
opFlow	2.5.1	>= 8.5.0, <= 8.5.8G	2.4
opFlow	2.5.2	>= 8.5.10G	2.4, 2.6, 3.0 - 3.4
opFlow	3.0.0 - 3.0.5	>=8.5.6	3.0 - 3.4	WiredTiger storageEngine is HIGHLY recommended
opFlow	3.0.6	N/A	3.0 - 3.4	NMIS is optional. WiredTiger storageEngine is HIGHLY recommended.
opFlow	3.0.8	N/A	3.0 - 3.4	NMIS is optional. WiredTiger storageEngine is HIGHLY recommended.
opFlow	3.0.10	N/A	3.0 - 3.4	NMIS is optional. WiredTiger storageEngine is HIGHLY recommended. For remote integration opCharts >= 3.0.6 required
opFlowSP	3.0.2	N/A	3.0 - 3.4	NMIS is optional. WiredTiger storageEngine is HIGHLY recommended. For local opCharts button to agent/interface version >= 3.0.10 is required

! For a list of compatible Operating Systems please check the NMIS version compatibility list.

opTrend

opTrend Documentation.

Product

Product Version

NMIS Version

MongoDB Version
(bold: recommended)

Notes

opTrend

1.2.1

>= 8.5.6G,
<= 8.5.8G

2.4

opTrend's config optrend_process_condition_in_nmis must

be disabled if you run this version with NMIS 8.5.10G

opTrend 1.2.3 >= 8.5.10G 2.4, 2.6, 3.0 - 3.4

! For a list of compatible Operating Systems please check the NMIS version compatibility list.

End of Life Products

opExport

opExport Documentation.

Product	Product Version	NMIS Version	MongoDB Version (bold: recommended)	Notes
opExport	1.6.7	>= 8.5.0, <= 8.5.8G	N/A
opExport	1.6.8	>= 8.5.10G	N/A

! For a list of compatible Operating Systems please check the NMIS version compatibility list.

opMaps

opMaps Documentation.

Product	Product Version	NMIS Version	MongoDB Version (bold: recommended)	Notes
opMaps	2.2.1	>= 8.4.8G	N/A	Works with any NMIS running .nmis files, i.e. if `use_json` is nonexistent or set to false
opMaps	2.2.4	>= 8.5.0G	N/A

! For a list of compatible Operating Systems please check the NMIS version compatibility list.

Product Compatibility

NMIS

NMIS 8 compatibility list:

NMIS 9 compatibility list:

Opmantek Installer

Open-AudIT

opConfig

opConfig 2.X 3.X compatibility list:

opConfig 4.X compatibility list:

opHA

opHA 2.X Compatibility list:

opHA 3.X Compatibility list:

opEvents

opEvents 1.X & 2.X Compatibility list:

opEvents 3.X Compatibility list:

opCharts

opCharts 2.X & 3.X Compatibility list:

opCharts 4.X Compatibility list:

opReports

opReports 3.X Compatibility list:

opReports 4.X Compatibility list:

opAddress

opAddress 1.X Compatibility list:

opAddress 2.X Compatibility list:

opFlow and opFlowSP

opTrend

End of Life Products

opExport

opMaps