The UPS Configured Models Report displays UPS models configured under 'report_ups_configured_models' in opCommon.nmis configuration file.
Setup:
Firstly edit /path/to/omk/conf/opCommon.nmis setting report_ups_configured_models which has the following default setting.
This configuration setting need only be set once as needed to configure the UPS models to be returned in the report.
'report_ups_configured_models' => {
'POWERALERT-APC' => {
'exclude_nodegraphs_in_this_report_type' => 'health,upspwr,upsbattemp'
},
'POWERALERT-ups' => {
'exclude_nodegraphs_in_this_report_type' => 'health,upspwr,upsbattemp'
}
},
The report will include graphtype health if health is removed from exclude_nodegraphs_in_this_report_type.
exclude_nodegraphs_in_this_report_type => undef will cause all available graphtypes to be displayed.
Then choose UPS Configured Models ReportunderCreate New Report >> General >> Type:
Example Screenshot:
