The table below describes which combinations of Opmantek products are tested and work well with what versions of NMIS and MongoDB.

NMIS

NMIS Documentation.

NMIS 8 Release Notes

NMIS 9 Release Notes

NMIS 8 compatibility list:

Product

Product Version

MongoDB Version
(bold: recommended)

Operating

Systems

Notes

NMIS

8.6.8

N/A

Debian 7, 8
Ubuntu 16
CentOS 7*
RHEL 7*

If install of NMIS 8 fails due to failure to install package WWW::Mechanize, pre-install WWW::Mechanize before installing NMIS:

sudo yum install -y perl-CPAN;
sudo yum install -y perl-App-cpanminus;
sudo cpanm WWW::Mechanize --sudo --notest;

*NB CentOS 6 and RHEL 6 are supported for existing customers who purchased support prior to 2020.

NMIS 9 compatibility list:

Product

Product Version

MongoDB Version
(bold: recommended)

Operating

Systems

Notes

NMIS

> 9.0.0

3.4, 3.6

Debian 9, 10*
Ubuntu 18, 20
CentOS 7**
RHEL 7
RHEL 8

RHEL 8 is supported from NMIS version 9.2.1

On Debian 8, a compatible version of MongoDB Perl Driver (version 1.2.3 or newer) cannot be installed, even when CPANM is used.
On Ubuntu 16.04, pre-installing cpanminus, MongoDB Perl Driver and Mojo::File allows for a clean install of NMIS9:

apt-get install build-essential cpanminus;
cpanm --sudo MongoDB;
cpanm --sudo Mojo::File;

If install of NMIS 9 fails due to failure to install package WWW::Mechanize, pre-install WWW::Mechanize before installing NMIS:

sudo yum install -y perl-CPAN;
sudo yum install -y perl-App-cpanminus;
sudo cpanm WWW::Mechanize --sudo --notest;

Release 9.0.4 of NMIS introduces the smarter non-interactive installation mode.

*Should Debian 10 install fail with this error,
'The following signatures couldn't be verified because the public key is not available: NO_PUBKEY',
please run the following commands to install the needed GPG Keys and reinstall:

sudo -i
type wget >/dev/null 2>&1 && GIMMEKEY="wget --tries=5 -q -T 20 -O - https://ftp-master.debian.org/keys/archive-key-8.asc" || GIMMEKEY="curl --retry 4 -L -s -m 20 https://ftp-master.debian.org/keys/archive-key-8.asc";
$GIMMEKEY | apt-key add -||$GIMMEKEY | apt-key add -||$GIMMEKEY | apt-key add -;

**CentOS 8 support has been withdrawn due to CentOS 8 being end of maintenance in 31 Dec 2021, your CentOS target should be CentOS 7 https://wiki.centos.org/About/Product

Opmantek Installer

Some notes that are common for all Opmantek Applications:

The Opmantek installer can be preseeded before the installer is invoked.
On CentOS and RHEL, always check the status of firewalld and selinux when unable to connect via http|https. During the installation, the installer prompts for disable selinux.

Open-AudIT

Open-AudIT Documentation.

Open-AudIT Release Notes

Product

Product Version

Database

Operating

Systems

Notes

Open-AudIT

3.3.1 +

MariaDB

Windows Server 2016 and up (not compatible with Windows 10)
CentOS 7**
RHEL 7
RHEL 8
Debian 9 and up*
Ubuntu 18.04 and up

64bit systems only. More information.

*Should Debian 10 install fail with this error,
'The following signatures couldn't be verified because the public key is not available: NO_PUBKEY',
please run the following commands to install the needed GPG Keys and reinstall:

sudo -i
type wget >/dev/null 2>&1 && GIMMEKEY="wget --tries=5 -q -T 20 -O - https://ftp-master.debian.org/keys/archive-key-8.asc" || GIMMEKEY="curl --retry 4 -L -s -m 20 https://ftp-master.debian.org/keys/archive-key-8.asc";
$GIMMEKEY | apt-key add -||$GIMMEKEY | apt-key add -||$GIMMEKEY | apt-key add -;

**CentOS 8 is not supported due to CentOS 8 being end of maintenance in 31 Dec 2021, your CentOS target should be CentOS 7 https://wiki.centos.org/About/Product

opConfig

opConfig Documentation.

opConfig Release Notes

opConfig 2.X 3.X compatibility list:

Product	Product Version	NMIS Version	MongoDB Version (bold: recommended)	Notes
opConfig	2.2.0	>= 8.5.0, <= 8.5.8G	2.4	opConfig 2.2.0 won't be able to report config changes to NMIS if you run it with NMIS 8.5.10G
opConfig	2.2.2, 2.2.4	>= 8.5.10G	2.4, 2.6 or 3.0 - 3.4
opConfig	3.0.0	>= 8.5.10G	2.4, 2.6 or 3.0 - 3.4	To provide compatilibity with MongoDB 2.4 you have to set the configuration option db_use_v26_features to "false" or 0 (in conf/opCommon.nmis)
opConfig	3.0.3, 3.0.4	>= 8.5.10G	2.6, 3.0 - 3.4

opConfig 4.X compatibility list:

Product

Product Version

NMIS Version

MongoDB Version
(bold: recommended)

Notes

opConfig

4.0.0

> 9.0.0

3.4

NMIS needs to be installed but doesn't need to be running.

Please check the opConfig 4 release notes for a specific NMIS minor version requirement.

opConfig

4.1.1-4.3.0

>9.1.0

3.4

opConfig

>4.3.0

>9.2.4

3.6

! For a list of compatible Operating Systems please check the NMIS version compatibility list.

opHA

opHA Documentation.

opHA Release Notes

opHA 2.X Compatibility list:

Product

Product Version

NMIS Version

MongoDB Version
(bold: recommended)

Notes

opHA

2.1.2

>= 8.5.0, <= 8.5.8G

N/A

opHA 2.1.2 won't be able to transfer NMIS event statuses

if you run it with NMIS 8.5.10G

opHA

2.1.4

>= 8.5.10G

N/A

opHA 3.X Compatibility list:

Product	Product Version	NMIS Version	MongoDB Version (bold: recommended)	Notes
opHA	>= 3.0.0	>= 9.0.0	3.4	Please check the opHA 3 release notes for a specific NMIS minor version requirement.
opHA	>3.1.2	>9.1.0	3.4
opHA	>3.4.0	>9.2.4	3.4, 3.6

! For a list of compatible Operating Systems please check the NMIS version compatibility list.

opEvents

opEvents Documentation.

opEvents Release Notes

opEvents 1.X & 2.X Compatibility list:

Product	Product Version	NMIS Version	MongoDB Version (bold: recommended)	Notes
opEvents	1.2.4	>= 8.5.0	2.4
opEvents	1.2.6, 2.0.0	>= 8.5.10G	2.4, 2.6, 3.0 - 3.4
opEvents	2.0.2	>= 8.5.10G	2.6, 3.0 - 3.4	With MongoDB older than 2.6 the events table on the dashboard page will be empty.
opEvents	2.0.3 - 2.0.6	>= 8.5.10G	2.4, 2.6, 3.0 - 3.4	To provide compatilibity with MongoDB 2.4 you have to set the configuration option `db_use_v26_features` to "false" or 0 (in `conf/opCommon.nmis`)
opEvents	2.2.0 - 2.4.0	>= 8.5.10G	2.6, 3.0 - 3.4

opEvents 3.X Compatibility list:

Product

Product Version

NMIS Version

MongoDB Version
(bold: recommended)

Notes

opEvents

>= 3.0.0

> 9.0.0

3.4

NMIS needs to be installed but doesn't need to be running.

Please check the opConfig 4 release notes for a specific NMIS minor version requirement.

opEvents

>3.1.0

>9.1.0

3.4

opEvents

>4.1.0

>9.2.4

3.4, 3.6

! For a list of compatible Operating Systems please check the NMIS version compatibility list.

opCharts

opCharts Documentation.

opCharts Release Notes

opCharts 2.X & 3.X Compatibility list:

Product	Product Version	NMIS Version	MongoDB Version (bold: recommended)	Notes
opCharts	2.4.12	>= 8.5.6G	N/A
opCharts	2.6.2	>= 8.5.6G	N/A	opCharts works best with NMIS 8.5.10G
opCharts	3.0.0 - 3.0.7	>= 8.5.6G	2.6, 3.0 - 3.4	opCharts works best with NMIS 8.5.10G or newer
opCharts	3.0.8	>= 8.5.10G	2.6, 3.0 - 3.4
opCharts	3.0.10	>= 8.5.10G	2.6, 3.0 - 3.4
opCharts	3.2.0	>= 8.5.10G	3.0 - 3.4	At and above opCharts 3.2 Mongo 3 is required
opCharts	3.2.4 - 3.2.5	>= 8.6.2	3.0 - 3.4

opCharts 4.X Compatibility list:

Product	Product Version	NMIS Version	MongoDB Version (bold: recommended)	Notes
opCharts	>= 4.0.0	>= 9.0.0	3.4	Please check the opCharts 4 release notes for a specific NMIS minor version requirement.
opCharts	>4.1.3	>9.1.0	3.4
opCharts	>4.3.0	>=9.2.4	3.4, 3.6

! For a list of compatible Operating Systems please check the NMIS version compatibility list.

opReports

opReports Documentation.

opReports Release Notes

opReports 3.X Compatibility list:

Product	Product Version	NMIS Version	MongoDB Version (bold: recommended)	Notes
opReports	3.0.2 - 3.0.8	>= 8.5.0	N/A
opReports	3.0.10 - 3.0.14	>=8.6.0	N/A	Display names are not supported if you use older versions of NMIS
opReports	3.1.0	>=8.6.2	N/A

opReports 4.X Compatibility list:

Product	Product Version	NMIS Version	MongoDB Version (bold: recommended)	Notes
opReports	> 4.0.0	>= 9.0.11	N/A	Please check the opReports release notes for a specific NMIS minor version requirement.
opReports	>4.1.1	>9.1.0	N/A
opReports	>4.3.0	>9.2.4	N/A

! For a list of compatible Operating Systems please check the NMIS version compatibility list.

opAddress

opAddress Documentation.

opAddress Release Notes

opAddress 1.X Compatibility list:

Product	Product Version	NMIS Version	MongoDB Version (bold: recommended)	Notes
opAddress	1.0.4	> 8.5.0	2.4
opAddress	1.0.5	>= 8.5.10G	2.4, 2.6, 3.0 - 3.4

opAddress 2.X Compatibility list:

Product	Product Version	NMIS Version	MongoDB Version (bold: recommended)	Notes
opAddress	2.0.0	>= 9.2.1	3.0 - 3.4
opAddress	>2.1.0	>= 9.2.4	3.4, 3.6

! For a list of compatible Operating Systems please check the NMIS version compatibility list.

opFlow and opFlowSP

opFlow Documentation

Product	Product Version	NMIS Version	MongoDB Version (bold: recommended)	Notes
opFlow	2.5.1	>= 8.5.0, <= 8.5.8G	2.4
opFlow	2.5.2	>= 8.5.10G	2.4, 2.6, 3.0 - 3.4
opFlow	3.0.0 - 3.0.5	>=8.5.6	3.0 - 3.4	WiredTiger storageEngine is HIGHLY recommended
opFlow	3.0.6	N/A	3.0 - 3.4	NMIS is optional. WiredTiger storageEngine is HIGHLY recommended.
opFlow	3.0.8	N/A	3.0 - 3.4	NMIS is optional. WiredTiger storageEngine is HIGHLY recommended.
opFlow	3.0.10	N/A	3.0 - 3.4	NMIS is optional. WiredTiger storageEngine is HIGHLY recommended. For remote integration opCharts >= 3.0.6 required
opFlowSP	3.0.2	N/A	3.0 - 3.4	NMIS is optional. WiredTiger storageEngine is HIGHLY recommended. For local opCharts button to agent/interface version >= 3.0.10 is required

! For a list of compatible Operating Systems please check the NMIS version compatibility list.

opTrend

opTrend Documentation.

Product

Product Version

NMIS Version

MongoDB Version
(bold: recommended)

Notes

opTrend

1.2.1

>= 8.5.6G,
<= 8.5.8G

2.4

opTrend's config optrend_process_condition_in_nmis must

be disabled if you run this version with NMIS 8.5.10G

opTrend 1.2.3 >= 8.5.10G 2.4, 2.6, 3.0 - 3.4

! For a list of compatible Operating Systems please check the NMIS version compatibility list.

End of Life Products

opExport

opExport Documentation.

Product	Product Version	NMIS Version	MongoDB Version (bold: recommended)	Notes
opExport	1.6.7	>= 8.5.0, <= 8.5.8G	N/A
opExport	1.6.8	>= 8.5.10G	N/A

! For a list of compatible Operating Systems please check the NMIS version compatibility list.

opMaps

opMaps Documentation.

Product	Product Version	NMIS Version	MongoDB Version (bold: recommended)	Notes
opMaps	2.2.1	>= 8.4.8G	N/A	Works with any NMIS running .nmis files, i.e. if `use_json` is nonexistent or set to false
opMaps	2.2.4	>= 8.5.0G	N/A

! For a list of compatible Operating Systems please check the NMIS version compatibility list.

Product Compatibility

NMIS

NMIS 8 compatibility list:

NMIS 9 compatibility list:

Opmantek Installer

Open-AudIT

opConfig

opConfig 2.X 3.X compatibility list:

opConfig 4.X compatibility list:

opHA

opHA 2.X Compatibility list:

opHA 3.X Compatibility list:

opEvents

opEvents 1.X & 2.X Compatibility list:

opEvents 3.X Compatibility list:

opCharts

opCharts 2.X & 3.X Compatibility list:

opCharts 4.X Compatibility list:

opReports

opReports 3.X Compatibility list:

opReports 4.X Compatibility list:

opAddress

opAddress 1.X Compatibility list:

opAddress 2.X Compatibility list:

opFlow and opFlowSP

opTrend

End of Life Products

opExport

opMaps