Table of Contents |
---|
A number of Opmantek products use a common node configuration infrastructure, which supports standard, product-specific and custom node attributes. This page describes both the core properties and outlines the product-specific ones.
Common Properties
These are used by all Opmantek products (exception: NMIS does not use the addresses
property). Only the first two, name and hostname host,are absolute absolutely necessary properties.
The properties shown in italic are not directly interpreted by the applications and are completely optional.
Property Name | Description |
---|---|
name | The internal name of the node. This is used for identifying and displaying the node, not for communication with the node! |
host | The DNS name, unqualified host name or main IP address for this node. Using a fully qualified DNS host name is recommended. |
addresses | A list containing any secondary IP addresses that should also be associated with this node. |
group | The (single) group that this node belongs to, which is used to control what nodes a user is allowed to see. |
notes | Free-form notes for a node, which are shown on the relevant context pages. (optional) |
comments | A list of originator- and time-tagged comments for this node. (optional, supported in opEvents 2.0 and newer) |
location | The location of the node. (optional) |
businessService | The service the node provides. (optional) |
Common Properties for NMIS 9
For the new product generation, opEvents and opConfig use the same collection where NMIS 9 saves this data.
The properties shown in italic are not directly interpreted by the applications and are completely optional.
Property Name | Description |
---|---|
uuid | A unique identifier of the node |
cluster_id | The identifier for the server. Indicates that this is a local node when it is the same as the cluster_id specified in the NMIS 9 config file. |
configuration.host | The DNS name, unqualified host name or main IP address for this node. Using a fully qualified DNS host name is recommended. |
configuration.addresses | A list containing any secondary IP addresses that should also be associated with this node. |
configuration.group | The (single) group that this node belongs to, which is used to control what nodes a user is allowed to see. |
configuration.notes | Free-form notes for a node, which are shown on the relevant context pages. (optional) |
configuration.comments | A list of originator- and time-tagged comments for this node. (optional, supported in opEvents 2.0 and newer) |
configuration.location | The location of the node. (optional) |
configuration.businessService | The service the node provides. (optional) |
Properties for Licensing
...
and Activation
Both opConfig (2.1 and up) and opEvents (1.2.3 and up) support per-node activation and licensing, which is controlled by the properties described below.
...
By default nodes are enabled for all products except opConfig. Nodes are disabled if and only if they are explicitely marked as explicitly set to disabled.
Property Name | Description |
---|---|
activated.opConfig | If set to 0, the node is disabled for opConfig. If unset or set to any non-zero value, the node is considered active. |
activated.opEvents | If set to 0, the node is disabled for opEvents. If unset or set to any non-zero value, the node is considered active. |
activated. |
NMIS | If set to 0, the node is disabled for |
NMIS. If unset or set to any non-zero value, the node is considered active. All nodes that are activated for NMIS are activated and licensed for opCharts. |
Note: The activation properties are within a subhash/subdocument, and the listing above used uses MongoDB dot-notation to indicate that (just like you would access such properties in an opEvents policy rule or an opConfig compliance rule).
...
The properties given in italic are optional and only relevant for specific types of devices.
Property Name | Description |
---|---|
connection_info.personality | The type of OS or system 'personality', which is used for determining what command sets are applicable. |
connection_info.credential_set | Which credential set to use when authenticating to this node. |
connection_info.transport | Which transport mechanism to use for connecting to this node. Valid choices are "SSH" or "Telnet". |
connection_info.privileged_paging | Whether setting up paging requires privileged mode. Only relevant on Cisco PIX/ASA. |
connection_info.line_endings | What line separator character(s) to send to the node. By default the patform's 'newline' character sequence is used. |
connection_info.default_continuation | The name of the phrasebook macro to use for line continuation. |
connection_info.connect_options | Any extra, non-standard options for the connection. See the documentation for Net::CLI::Interact for details. If present, this must be an Array in JSON format. |
os_info.os | The general OS type. Required to determine what command sets are applicable. |
os_info.version | The OS Version identifier. |
os_info.major | The Major Release Number extracted from the OS Version. |
os_info.train | The Train of the OS version. Relevant for Cisco devices only. |
os_info.platform | The OS Platform as extracted from the Version. |
os_info.image | The OS Image. Relevant mainly for Cisco devices. |
os_info.featureset | The enabled Feature Sets of this system. Relevant mainly for Cisco devices. |
Status | ||||
---|---|---|---|---|
|
opEvents Properties
The current version of opEvents , 1.2.3, does not make use of does have a product-specific propertiesnode property: activated.opEvents
...
NMIS Properties
When a node is refreshed or imported from NMIS, many of its properties in NMIS are also transferred. This includes certain NMIS uses further properties to control its operations, mostly things like SNMP-related identities, node active and collect flags and the like., etc. The table below describes the most important properties that NMIS interprets or understands.
Whenever a node in opConfig or opEvents is refreshed/imported from NMIS, all of NMIS' node properties are also transferred. These properties are currently not used by opConfig or opEvents, but will show up when you export a node using opnode_admin. Your opEvents and opConfig policies can make use of these properties, you can edit them with opnode_admin (and, to some extent, via the GUI if you modify the configuration variables opevents_gui_node_summary_list
and/or opconfig_gui_node_summary_list
).
Property Name | Description |
---|---|
active | whether the node is active and handled by NMIS or should be ignored |
collect | whether SNMP data should be collected from this node |
ping | whether reachability statistics should be collected for this node |
model | what type of device this is (default: "automatic") |
version | snmpv1, snmpv2c or snmpv3; relevant only if collect is true |
community | read-only community string for access using snmpv1 or snmpv2c |
netType | wan or lan |
roleType | core, access or distribution - the three layers of the Cisco three-layer hierarchical network model |
username privprotocol | authentication and privacy parameters for SNMP Version 3 |
authkey privkey | Alternative password parameters for SNMP Version 3. Optionally, theauthkey and privkey can be used so that a plain text password does not have to be specified (see Net::SNMP). The snmpkey utility can be used to create the hexadecimal key string with the authoritativeEngineID (MAC address) for the destination device (see snmpkey). |
port | which port to use for SNMP access (default: 161) |
timezone | which timezone this system is in, numeric offset |
webserver | whether the node runs a webserver. if true, a link to the node is presented in the NMIS GUI |
threshold | whether thresholds are to be processed for this node |
cbqos | whether Quality of Service data should be collected for this node (if the device and model support QoS) |
Status | ||||||
---|---|---|---|---|---|---|
|